• Sam_Bass@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    9 hours ago

    heh. my 15 year old frigid started making random groans the last couple weeks. far enough apart that i couldnt figure out where it came from. got lucky one day it moaned while i was close enough to yank open the freezer and see where the lever for the icemaker had accidentally got flipped to the on position. since i hadnt hooked up the water line to it, the groan was the pump sucking vacuum

  • LovableSidekick@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    11 hours ago

    My wife and I are on our third fridge in 35 years. But the furnace in her mom’s house when we sold it 5 years ago had been running since the late 1970s.

    • BowtiesAreCool@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      9 hours ago

      Except furnaces functionally shut off when not actively making heat. A fridge potentially is only off for power outages or a cleaning

      • abbotsbury@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        8 hours ago

        Don’t fridges do the same thing? Once it gets the interior to the set temperature, the compressor turns off until the sensors say it needs more cold.

      • LovableSidekick@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        9 hours ago

        30 years is a long life for a furnace. This thing was 45-50 and still running fine. The last maintenance note on the sheet on the inside was in the 80s lol.

  • loganb@lemmy.world
    link
    fedilink
    arrow-up
    13
    ·
    15 hours ago

    Glances over at my 1954 GE Combination that has NEVER been serviced outside of cleaning and replacing the light bulbs.

  • MonkderVierte@lemmy.ml
    link
    fedilink
    arrow-up
    20
    arrow-down
    2
    ·
    19 hours ago

    Old fridges never die. Modern fridges are more efficient but more break-y, can’t have both.

    • Fosheze@lemmy.world
      link
      fedilink
      English
      arrow-up
      22
      ·
      15 hours ago

      Actually modern fridges are usually less efficient. But that’s because they use refrigerants that are literally thousands of times less harmful to the environment.

      Old appliances frequently used R-12 which is an damn nice refrigerant except it depleted ozone and has a GWP (global warming potential) of 10,900. That means 1lb of R12 released into the air causes the same amount of global warming as releasing 10,900 lbs of CO2.

      Newer appliances use refrigerants like R134a which still works pretty well, doesn’t deplete ozone, and only has a GWP of 1,430.

      The newest appliances are more frequently using R-600a which is hard on compressors because it has a high head pressure and it doesn’t cool quite as well. But it also doesn’t deplete ozone and it has a GWP of just 3. The bigest downside of that one is that it’s very flamable (it’s isobutane) so the legal limit on how much residential appliances can us is very low.

      • MonkderVierte@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        14 hours ago

        I’ve read somewhere it is because conpressor nozzke has to be made thinner/fragiler for the better efficiency. Other comments say it’s because old refrigerants were better but more “dangerous”. Maybe both.

  • misterundercoat@lemmy.world
    link
    fedilink
    arrow-up
    22
    ·
    20 hours ago

    Just be sure to clear the lint off your coils every five years or so. Otherwise you’re making the poor guy suck air through a shag carpet.

  • Warl0k3@lemmy.world
    link
    fedilink
    arrow-up
    35
    arrow-down
    2
    ·
    23 hours ago

    Thermal cycling is one of the biggest stressors electrical components can be subjected to. Leaving your processor on and at a consistent load massively improves the lifetime of the chip. So take THAT, mom!

    • Stephen G. Tallentyre@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      3 hours ago

      I had to scroll way too far to find this. Especially considering that I have a desktop with full disk encryption, I don’t worry about it. If anyone ever did break into my house and take my computer, they would have to unplug it first; at that point, the disk would encrypt, and they’d have some really nice hardware which sucks for me, but that’s all they’d get.

      • Warl0k3@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 hour ago

        I feel that. All the information stored on my PC isnt worth a fraction of what my graphics graphics card cost…

    • 𝕾𝖕𝖎𝖈𝖞 𝕿𝖚𝖓𝖆@lemmy.world
      link
      fedilink
      English
      arrow-up
      14
      ·
      23 hours ago

      Heat cycling is a huge stressor on any material. That’s part of why diesel freight trucks tend to last well past a million miles while it’s newsworthy if a passenger car makes it that long. How many times a week is your Toyota Corolla driving 10+ hours at a time? Most commonly, when you hear of a million mile vehicle, it was making long haul deliveries daily and was maintained at the correct intervals.

      • Takumidesh@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        20 hours ago

        I think there are a lot of other factors in that case.

        The biggest reason why it’s rare to see regular cars get to a million miles is because they don’t get driven as much. At the average of 14k miles per year it would take 71 years for someone to drive 1 million miles. Since it takes so long to get there, many non engine related issues start taking hold like rust and obsoletion.

    • Fosheze@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      15 hours ago

      I run prime95 24/7 on my AMD FX-9590 to keep it at a nice stable temp. Plus it means I also don’t need to heat my house in the winter. Gotta love a tdp of 220W.

  • DarkCloud@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    22 hours ago

    The fridge is a big pump, it needs to circulate… It’s when it sits idle for too long that it risks death!

    • Dagnet@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      19 hours ago

      Except those walkers capable of perpetual movement, we never let them rest cause we aren’t sure if we can make them move again